Need help?Do you have a question about the Calrec Artemis and is the answer not in the manual?
General| Type | Digital Mixing Console |
|---|---|
| Sample Rate | Up to 96 kHz |
| EQ | 4-band parametric EQ per channel |
| Dynamics | Compressor, gate per channel |
| Routing | Flexible matrix routing |
| I/O | Analog, MADI |
| Networking | Dante, Ravenna |
| Audio Formats | PCM |
| Connectivity | GPIO |
| Control Surface | touchscreen interface |
| Power Supply | Redundant power supplies |
| Dimensions | Varies depending on frame size and configuration |
Provides essential safety guidelines, explains warning symbols, and covers earthing and battery replacement.
Describes the console's flexibility, scalability, architecture, and key features like Bluefin2 DSP.
Details the PC's role, peripherals, login, application, software installation, power, and online documentation.
Explains the layout of path faders, A/B sub-layers, assign buttons, and indicators.
Explains the Processing mode's overview screen for adjusting critical operational controls like EQ and dynamics.
Details how to set up, select, and memorize custom wild controls within the fader panel.
Explains how to configure I/O boxes and patchbays for sample rate compatibility.
Covers filtering the Hydra2 network, managing boxes at different sample rates, input ports, and patchbays.
Describes how to assign channels, groups, auxs, and tracks to faders on the surface.
Details fader management, memories from larger consoles, and assigning auxs/tracks and remote paths.
Covers searching sources/destinations, channel views, and patching inputs.
Explains patching sources to faders, bulk patching, protection, mic open, and port info.
Explains how to control protected inputs and implications of loading shows/memories.
Illustrates the signal flow within an Artemis channel path, including inserts, EQ, dynamics, and sends.
Details EQ availability, bands, responses, and controls including On/Off and alternate settings.
Describes Dynamics 1 controls for compressor/limiter and expander/gate, including sidechain EQ.
Details the second dynamics processor, including its controls and automixer capabilities.
Explains automixer functionality for controlling levels, assigning control, and metering.
Covers delay insertion options (input, path, output) and assignable delay at different sample rates.
Explains creating VCA groups, group hierarchy, and fader status indicators.
Details autofader controls, parameter settings, and bypass options.
Explains assigning GPIs to autofaders and assigning autofaders to faders.
Details bus resources, setting bus widths, admin protection, and buses at different sample rates.
Covers making routes using Assign Mode, accessing send controls, and paging through buses.
Covers patching DSP outputs to ports, sample rates, shortcuts, and Hydra2 patchbays.
Explains the system for notifying operators of output port usage and preventing accidental changes.
Covers direct output resources, sample rates, and assigning direct outputs from surface or PC.
Explains setting fader panels to Monitor mode for monitoring, metering, and talkback features.
Details pre-selectors, speaker pre-selectors, and changing pre-selector sources.
Covers the AFL, PFL, and Output Listen system, including access from faders and buses.
Details talkback facilities, routing, groups, and talkback levels.
Explains the Mix Minus system for sending comprehensive mixes minus the user's own input.
Describes TFT meter layouts, cells, and grid configuration for custom meter displays.
Provides an overview of loudness meters, their components, and sample rate differences.
Details how to access and control loudness meters from the console surface.
Covers managing shows and memories, including creating new shows and loading/saving.
Explains backing up, restoring, renaming, and deleting shows and memories.
Covers saving, loading, backing up, deleting, ordering, and transferring user memories.
Explains how to protect paths and ports from memory load operations.
Describes the On Air and Rehearse modes and their restrictions on console operations.
Covers fail warning indicators, reset buttons for DSP, surface, and control systems.
Covers configuring GPIO inputs and outputs for external control and console response.
To Next Page
