CAME BKV Series User Manual

p. 41 - Manual FA01274-EN - 11/2018 - © CAME S.p.A. - The contents of this manual may change, at any time, and without notice. Original instructions
 If you lose the password, you will need to reset the control board to its factory settings. The reset the control
board procedure, deletes all saved users, the set times and the calibration data.
On the control board, use the following resetting procedure:
- cut the main power supply to the control board;
- keep pressed the < and > keys, then power up the control board. Keep the keys pressed until the display reads
[Factory reset], then press ENTERto confi rm.;
-select [Confi rm? YES]
Once confi rmed, set the language you prefer and follow the guided procedure.
Done
Remove Password
Confirm? YES
Password
Remove password
Done
Change password
1. On the [Password] menu, select [Change password]. Press the ENTER key.
2. Enter four digits by using the < > keys, then press ENTER;
3. Reconfi rm password.
Repeat Password
0___
New Password
0___
Password
Change password
Remove password
1. From the [Password], select [Remove password]. Press the ENTER key.
2. Select [Confi rm? YES] and press ENTER.

CAME BKV Series Specifications

General

Brand	CAME
Model	BKV Series
Category	Gate Opener
Language	English