Canon imageCLASS LBP121dn - Page 206

[Millimeter/Inch Entry Switch]
[Menu] [Preferences] [Display Settings]
Change the units sho
wn on the screen for entering length and width.
[Millimeter]
[Inch]
[Displ. Timing for Cartridge Prep. Notif.]
[Menu] [Preferences] [Display Settings]
When the toner in a toner cartridge runs lo
w, a message appears notifying you to prepare a new toner cartridge. To
manually specify when this message appears (the toner level in a cartridge), specify the timing in [Custom].
When [Auto] is enabled, the machine automatically decides when to display the message.
[Auto]
[Custom]
2 to 20
to 99 (%)
[Show Warnings]
[Menu] [Preferences] [Display Settings]
Specify whether a notication message is displayed when a toner cartridge is lo
w on toner.
* If the machine is congured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off].
[Action When Warning](P. 199)
[Low Cartridge Level]
[Off]
[On]
[Action When Warning]
[Menu] [Preferences] [Display Settings]
Specify whether to continue printing when a toner cartridge is lo
w on toner.
If this is set to [Stop Printing], a notication message appears when the toner cartridge runs low on toner.
[Show
W
arnings](P. 199)
[Low Cartridge Level]
[Continue Printing]
[Stop Printing]
[Display IP Address]
[Menu] [Preferences] [Display Settings]
Specify whether to display the machine
’s IPv4 address in the [Status Monitor] screen.
[Status Monitor]
Scr
een(P. 82)
Settings Menu Items
199