Service Mode > NETWORK GR.
■ CA-KEY
Service Mode > NETWORK GR. > CA-KEY
CLEAR Deletion of “key and certificate” and “CA certificate”
Detail To return “the key and certificate setting” and “the CA certificate setting” to their defaults.
Adj/Set/Operate Method
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Executing this item and then turning the main power switch OFF/ON returns “the key and certificate
setting” and “the CA certificate setting” to their defaults.
■ SLEEP ADVERTISE
Service Mode > NETWORK GR. > SLEEP ADVERTISE
SWITCH ON/OFF of sleep notification
Detail To set whether to use the sleep notification.
Adj/Set/Operate Method
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
Off/On
Off: Not notify sleep mode
On: Notify sleep mode
Default Value
On
PORT Port number setting for sleep notification
Detail To set the port number as the destination of sleep notification.
Adj/Set/Operate Method
1) Enter setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
1 to 65535
Default Value
11427
TTL Setting of sleep notification range
Detail To set the number of routers that can send sleep notification messages.
Adj/Set/Operate Method
1) Enter setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 254
Default Value
3
INTERVAL Setting of sleep notification interval
Detail To set the interval (sec.) for sleep notification.
Adj/Set/Operate Method
1) Enter setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
60 to 65535
Default Value
600
■ IPSEC SETTING
Service Mode > NETWORK GR. > IPSEC SETTING
IKERETRY Setting of IKE retry times
Detail To set the number of IKE retries.
Adj/Set/Operate Method
1) Enter setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 3
Unit
Number of times
Default Value
1
9. Service Mode
230
To Next Page
