Canon imageCLASS MF3010 - Page 145

NOTE
Condition to specify the settings
This setting is available when [Color], [Color (Documents)], or
[Gr
ayscale] is selected in [Color Mode].
[Reduce Dust and Scratches]
Minimize dust and scratches of the photo.
● [None]
No dust and scr
atches are minimized.
● [Low]
Remove only a small amount of dust and scratches.
● [Medium]
This setting is best recommended in most cases.
● [High]
Remove large dust spots and scratches of the photo. Note that this setting may remove
subtle details of the image.
NOTE
Condition to specify the settings
This setting can be enabled when:
[Color], [Color (Documents)], or [Gr
ayscale] is selected for [Color Mode].
[Fading Correction]
Correct the fading of the image, as well as increase saturation to enhance obscure, tinted
images. This setting is unselectable when no image is displayed in the pr
eview area.
● [None]
No fading correction is made.
● [Low]
Make low-level fading correction.
● [Medium]
This setting is best recommended in most cases.
● [High]
Make extensive fading correction. Note that this setting may change the tone of the
image.
NOTE
Condition to specify the settings
This setting can be enabled when:
[Color] or [Color (Documents)] is selected for [Color Mode], and
[Recommended] or [Color Matching] is selected for [Color Corr
ection]
within the [Preferences] dialog box.
Pr
eferences(P. 144)
[Grain Correction]
Smooth the lm gr
ain of the image shot on fast lm, to make sure excellent image quality
and smooth gradation.
● [None]
No lm grain correction is made.
● [Low]
This setting is best recommended for images showing little noticeable banding.
● [Medium]
This setting is best recommended in most cases.
● [High]
Smooth the lm grain extensively. Note that this setting may deteriorate image
sharpness and quality.
Scan
140