Canon imagePROGRAF iPF830 - Pausing Printing

Pausing Printing
Pausing Printing
Pausing Printing
Pausing Printing
During printing, if you set Pause Print in the Control Panel menu to On, printing is stopped at that point and the
printer enters a state in which printing is paused. (See "Control Panel Display.") ➔P.424
Printing from the job queue is not possible in this state.
To restore normal operation after this state, set Pause Print to Off.
Note
• In the following cases, the status is cleared even if you do not set Pause Print to Off, and printing from the job
queue resumes.
• When paper is advanced
• When you execute Chg. Paper Type in the Paper Menu
1
During printing, on the Tab Selection screen of the Control Panel,
press ◀ or ▶ to select the Job tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the
OK button.
The Job Menu is displayed.
3 Press ▲ or ▼ to select Pause Print, and then press the OK button.
4 Press ▲ or ▼ to select On or Off, and then press the OK button.
iPF830 Pausing Printing
User's Guide
Basic Printing Workflow Pausing Printing
27