EasyManua.ls Logo

Canon imagePROGRAF iPF830 - Network Environment

Canon imagePROGRAF iPF830
680 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Environment
Network Environment
Network Environment
Network Environment
System requirements
The system requirements, which vary depending on your network, are as follows.
Printing over a TCP/IP network (when using IPv4)
Compatible operating systems
Windows XP
Windows Server 2003
Windows Server 2003 x64
Windows Server 2003 R2
Windows Server 2003 R2 x64
Windows Vista
Windows Vista x64
Windows Server 2008
Windows Server 2008 x64
Windows 7
Windows 7 x64
Windows Server 2008 R2 x64
Windows 8
Windows 8 x64
Windows Server 2012 x64
Windows 8.1
Windows 8.1 x64
Windows Server 2012 R2 x64
OS X v10.6.8 or later
Printing over a TCP/IP network (when using IPv6)
Compatible operating systems
Windows Vista
Windows Vista x64
Windows Server 2008
Windows Server 2008 x64
Windows 7
Windows 7 x64
Windows Server 2008 R2 x64
Windows 8
Windows 8 x64
Windows Server 2012 x64
Windows 8.1
Windows 8.1 x64
Windows Server 2012 R2 x64
OS X v10.6.8 or later
Note
When using IPv6, you must specify IPv6 on the Control Panel or in RemoteUI. For instructions, "Configuring
TCP/IPv6 Network Settings" P.482 or see "Configuring the Printer's TCP/IP Network Settings With Remo-
teUI." P.484
Network Environment
After confirming what type of network environment you will connect the printer to, set up the printer and computers
as needed. For the specifications of the network interface, see "Specifications." P.660
Network Environment
iPF830
User's Guide
Network Setting Network Environment
476

Table of Contents

Other manuals for Canon imagePROGRAF iPF830

Related product manuals