Canon imagePROGRAF iPF830 - Setting Control Panel Access Lock

TCP/IPv6 Use a stateless address
Prefix Length 3
IPv6 settings values.
Stateless Address 4
Prefix Length 4
Stateless Address 5
Prefix Length 5
Stateless Address 6
Prefix Length 6
Use a link-local Address Link-Local Address
Prefix Length
Use a manual address IP Address
Prefix Length
Default Router Address
Prefix Length
Primary DNS Server Address
Secondary DNS Server Address
Use the same host name and do-
main name as IPv4
DNS Host Name
DNS Domain Name
Perform dynamic updating of stateful addresses
Dynamically update the stateless address
Dynamically update the manual address
Frame Type
Use Zeroconf Function
MulticastDNS ServiceName
TCP/IPv6 LPD Printing IPv6 settings values.
IPP Printing
IPP Printer URI
RAW Printing
Raw Mode Bi-direction
Network Interface Physical Interface Network interface settings values.
Transmission Rate
MAC Address
Auto Detect
Communication
Ethernet Type
Spanning Tree
Use the Jumbo Frame Function
Setting Control panel access lock
Setting Control panel access lock
This section describes the procedure for setting and releasing the control panel access lock.
Note
•
The setting can only be changed in administrator mode.
Setting Control panel access lock iPF830
User's Guide
Control Panel Printer Menu
458