Handling rolls
Handling rolls
Attaching the Roll Holder to Rolls ................................................................................................................... 330
Loading Rolls in the Printer ............................................................................................................................. 333
Changing the Type of Paper ........................................................................................................................... 336
Specifying the Paper Length ........................................................................................................................... 337
Removing the Roll from the Printer ................................................................................................................. 338
Removing the Roll Holder from Rolls ...............................................................................................................340
➔ Clearing Jammed Roll Paper .................................................................................................................... 607
Feeding Roll Paper Manually ........................................................................................................................... 341
Keeping Track of the Amount of Roll Paper Left .............................................................................................. 341
Specifying the Ink Drying Time for Rolls .......................................................................................................... 342
Specifying the Cutting Method for Rolls .......................................................................................................... 344
Cutting the Leading Edge of Roll Paper Automatically .................................................................................... 350
Reducing Dust from Cutting Rolls ................................................................................................................... 351
Roll Holder Set ............................................................................................................................................... 352
Attaching the Roll Holder to Rolls
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
Using the 2-Inch Paper Core Attachment Using the 3-Inch Paper Core Attachment
Roll Holder Side Holder Stopper Side Roll Holder Side Holder Stopper Side
No Attachment Needed 2-Inch Paper Core Attachment 3-Inch Paper Core Attachment #1 3-Inch Paper Core Attachment #2
Caution
•
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may
cause injury.
Attaching the Roll Holder to Rolls
iPF830
User's Guide
Handling and Use of Paper Handling rolls
330
To Next Page
Loading...
