Canon imagePROGRAF iPF830 User Manual

Printed colors of lines are inaccurate during HP-GL/2 printing
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause Corrective Action
AdjustFaintLines is On in the Con-
trol Panel menu.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the source application, is
incorrect.
In the Control Panel menu, set Oversize to Off.
(See "Menu Settings.") ➔P.442
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
Cause Corrective Action
The page size of the HP-GL/2 print job, as created in the
source application, is incorrect.
Set Detect img size to Command priority or Detected size in the
Control Panel menu.
(See "Menu Settings.") ➔P.442
Set Conserve Paper to On in the Control Panel menu.
(See "Menu Settings.") ➔P.442
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Cause Corrective Action
Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") ➔P.442
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
Cause Corrective Action
The printer is analyzing the print job. Please wait a while until printing is finished.
A job was printed when Input Resolution in the Control
Panel menu was set to 600dpi.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") ➔P.442
iPF830
Printed colors of lines are inaccurate during HP-GL/2 printing
User's Guide
Troubleshooting HP-GL/2 problems
631

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm