Canon imagePROGRAF iPF830 User Manual

3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in C Be-
tween Pages and D Between Scans in B Drying
Time, and then click OK.
(See "Paper Detailed Settings Dialog Box (Mac
OS).") ➔ P.264
Specifying the Cutting Method for Rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit fol-
lowing printer driver settings.
Media
Menu >
Paper De-
tails >
(Various
Types of
Paper) >
Cutting
Mode
Automatic Automatic
Cutting
(See "Cut-
ting Roll
Paper After
Print-
ing.")
➔P.140
Yes
Eject (when
the paper
surface is
being
scratched /
to wait for
ink to dry)
Select this to move the cutter by key operation and
cut paper. Although there are cases with Automat-
ic in which the paper falls and the paper surface is
scratched when the paper rubs the Output Stacker,
you can avoid damaging the paper with this method
since you can cut by holding the paper with your
hand so that the paper does not fall when cutting,
Also, since you can cut while visually confirming the
drying of the ink, you can avoid ejecting paper be-
fore the ink has dried.
To cut the roll with the Cutter Unit, press the Cut
button.
Eject Yes
Manual
(when us-
ing media
that cannot
be cut with
the Cutter
Unit )
Select this for paper that cannot be cut with the
Cutter Unit and for paper of which the leading edge
curls strongly and rubs the printhead.
Cut each page from the roll using scissors. For con-
tinuous printing (if you will cut each page later), se-
lect Automatic Cutting > Yes or select Print Cut
Guideline.
Manual No, Yes, Print
Cut Guideline
Paper cut-
ting (to
have the
roll cut at
your speci-
fied posi-
tion)
Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting after
printing when Automatic Cutting > No is selected
or Print Cut Guideline is selected in the printer
driver.
Otherwise choose this option if you want to cut the
roll edge after loading a roll.
Cut button
pressed
Yes No, Print Cut
Guideline
Specifying the Cutting Method for Rolls iPF830
User's Guide
Handling and Use of Paper Handling rolls
344

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm