Cause Corrective Action
Remove the foreign object from the Media Take-up Sensor
path. Arrange the Basket Cloth and Basket Rod so they do
not interfere with the Media Take-up Sensor.
The Media Take-up Sensor cord is not connected to the Right Media
Take-up Unit correctly.
Reconnect the Media Take-up Sensor cord as follows.
1.
Turn the printer off.
2.
Disconnect the Media Take-up Sensor cord from the
Right Media Take-up Unit and reconnect it firmly, all the
way in.
3.
Turn the printer on.
(See "Loading the Rewind Spool on the Media Take-up
Unit.") ➔P.367
If the Media Take-up Unit continues rotating, contact your
Canon dealer for assistance.
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.") ➔ P.591
iPF830
The size of clear film cannot be detected
User's Guide
Troubleshooting Problems Regarding Paper
615