Cause Corrective Action
(See "Attaching the Roll Holder to Rolls.") ➔P.330
(See "Loading Rolls in the Printer.") ➔P.333
3.
If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.") ➔ P.336
4.
If no barcode was printed on the roll, specify the paper length.
(See "Specifying the Paper Length.") ➔P.337
5.
If "Not finished printing. Finish printing remaining jobs?" is
shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error oc-
curred.
There is remaining roll paper, but because it could not be
advanced, it could not be detected.
The unused portion of the roll is heavy, and this is placing a burden on
the printer. It may be helpful to change the printing mode, which will
change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of
the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for
Printing.") ➔P.54
Sheet removed.
Sheet removed.
Cause Corrective Action
A sheet has come out of
the printer during printing.
1.
Lift the Release Lever and remove the paper.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Sheet printing is selected.
Sheet printing is selected.
Cause Corrective Action
You have attempted to print on a sheet, but
no sheet is loaded.
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet,
and then print.
(See "Loading and Printing on Sheets.") ➔P.20
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Regular printing is selected, but a roll is loaded.
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
A print job for printing on sheets
was sent when a roll is loaded.
1.
Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have speci-
fied in the printer driver.
(See "Removing the Roll from the Printer.") ➔P.338
(See "Loading and Printing on Sheets.") ➔P.20
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.
You are using a roll with the
Media Take-up Unit, but a print
job requiring sheets was sent.
1.
Press the OK button to stop printing.
2.
After removing the roll, load and print on a sheet of the type and size of paper you have speci-
fied in the printer driver.
(See "Removing Printed Documents from the Media Take-up Unit (Optional).") ➔ P.372
(See "Loading and Printing on Sheets.") ➔P.20
Sheet removed.
iPF830
User's Guide
Error Message Messages regarding paper
644
To Next Page
Loading...
Need help?
General
Weight and Dimensions
