Canon imagePROGRAF iPF830 - Media take-up unit

Media take-up unit
Media take-up unit
Media Take-up Unit ........................................................................................................................................ 474
Media Take-up Unit (Optional) ......................................................................................................................... 365
Using the Media Take-up Unit (Optional) ......................................................................................................... 365
Enabling Roll Take-Up .................................................................................................................................... 366
Disabling Roll Take-Up .................................................................................................................................... 366
Loading the Rewind Spool on the Media Take-up Unit .................................................................................... 367
Removing Printed Documents from the Media Take-up Unit (Optional) ........................................................... 372
Media Take-up Unit (Optional)
Media Take-up Unit (Optional)
Use the optional Media Take-up Unit to have documents that are printed on rolls rewound automatically after print-
ing. This is convenient for large-format printing, or when printing large-volume jobs continuously.
Note
•
For instructions on installing the Media Take-up Unit, refer to the Media Take-up Unit Setup Guide.
• For information on the types of paper compatible with the Media Take-up Unit, refer to the Paper Reference
Guide. (See "Types of Paper.") ➔ P.320
• For Media Take-up Unit instructions,
see "Using the Media Take-up Unit (Optional)."
➔P.365
Using the Media Take-up Unit (Optional)
Using the Media Take-up Unit (Optional)
1 Turn the printer on. (See "Turning the Printer On and Off.") ➔ P.17
2 Enable roll take-up. (See "Enabling Roll Take-Up.") ➔P.366
3 Load the rewind spool on the media take-up unit. (See "Loading the Rewind Spool on the Media Take-up
Unit.") ➔ P.367 }
4 Turn on the Media Take-up Unit.
5 Print on the roll.
6 Turn off the Media Take-up Unit.
7 Remove the printed document from the media take-up unit. (See "Removing Printed Documents from the
Media Take-up Unit (Optional).") ➔P.372 } (Optional)
8 Disable roll take-up. (See "Disabling Roll Take-Up.") ➔P.366
iPF830
Media Take-up Unit (Optional)
User's Guide
Handling and Use of Paper Media take-up unit
365