Canon imagePROGRAF iPF830 - Paper Settings Panel

Paper Settings Panel
Paper Settings Panel
This panel appears when you select Paper Settings in the dialog area.
•
Media Type
This allows you to select the media type.
Note
•
Always select media type that is actually set in the printer. When the media you chose is different from the
media set in the printer, you may not receive the desired print results.
•
Easy Settings / Advanced Settings
Two modes are available to provide the optimum print settings for jobs.
The settings available on each mode are as follows.
• Easy Settings ➔ P.279
• Advanced Settings ➔ P.280
• Roll Paper Width
This selects the width of the roll media set to the printer.
Note
•
Available only if rolls are selected in Paper Source.
•
Copies
You can input the number of print copies in numerical characters.
Note
•
The maximum value is 999.
• You can change the numbers by clicking either ▲ button or ▼ button.
•
Restore Defaults Button
Click the button to reset to the setting when starting Preview.
• Print
Button
Click the button to begin printing.
Paper Settings Panel
iPF830
User's Guide
Mac OS Software Preview
278