6
Using both hands, rotate the Roll Holder in the direction of
the arrow to rewind the roll.
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
Note
•
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from
Rolls." ➔P.340
8
Lower the Ejection Guide and close the Top Cover.
Note
•
To load new paper in the printer at this point, see "Loading Rolls in the Printer." ➔ P.333
•
Clean inside the top cover before loading paper.
(See "Cleaning Inside the Top Cover.") ➔ P.591
iPF830
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
339
To Next Page
Loading...
