Note
•
If the main window is displayed at this time, it means that the media information has already been updated
and the rest of the operation is not needed.
Important
•
If the message on the right is displayed, the media
information file cannot be downloaded automatically
from the Internet. Configure the settings by referring
to If the Media Information File Does Not Download
Automatically From the Internet ➔P.379 .
4
The Media Configuration Tool main window is dis-
played. Click the Add Genuine Paper button.
5
In the Edit Media Types dialog box, click the Update
button.
6
The Confirm Update dialog box is displayed.
Configure Update Target and click the Execute but-
ton.
The printer control panel and printer driver media in-
formation is updated.
Note
•
You should normally select Update the printer control panel and printer driver.
Updating Media Information After Installation
iPF830
User's Guide
Handling and Use of Paper Media Configuration Tool (Windows)
378