Canon imagePROGRAF iPF830 User Manual

g Paper Feed Slot
When loading a roll, insert the edge of the roll paper here.
h Holder Stopper
Secure rolls on the Roll Holder with this part.
i Ink Tank Cover
Open this cover to replace an Ink Tank. (See "Ink Tank Cover (Inside).")
➔P.466
j Control Panel
Use this panel to operate the printer and check the printer status. (See "Control Panel.") ➔P.422
k Release Lever
Releases the Paper Retainer. Lift this lever toward the front of the printer when loading paper.
l
Maintenance Cartridge
Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.)
m Carrying Handles
When carrying the printer, have six people hold it by these handles under both sides.
n Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge.
o Stand
A stand that holds the printer. Equipped with casters to facilitate moving it.
p
Stand L
The left leg of the Stand.
q Stand R
The right leg of the Stand.
r Top Stand Stay
Supports Stand L and Stand R. Attach the optional Media Take-up Unit to this part.
s
Leg Covers
Covers for Stand L and Stand R.
t Stopper
Locks the Stand casters.
Always release the Stopper before moving the printer. Moving the printer while the Stopper is locked may
scratch the casters or the floor.
iPF830
Front
User's Guide
Printer Parts Printer parts
463

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm