Canon imagePROGRAF iPF830 User Manual

4
Keep the used Maintenance Cartridge level as you put it in
the plastic bag. Expel excess air from the plastic bag and
seal the zipper.
5
Confirm the Maintenance Cartridge is right-side up, put it in
the box with the packaging material attached, and store it
so that it stays level.
Important
•
Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Also,
seal the zipper thoroughly. Otherwise, ink may leak and cause stains.
Note
• Put the used Maintenance Cartridge in the plastic bag of the new cartridge, and dispose of it in accord-
ance with local regulations.
6
Wipe away any soiling on the Maintenance Cartridge Cov-
er.
Important
•
Support the Maintenance Cartridge Cover from underneath as you wipe it.
7
Keeping the new Maintenance Cartridge level, insert it all
the way in.
The printer now initializes the Maintenance Cartridge.
Important
•
Do not remove the Maintenance Cartridge during initialization immediately after replacing the Mainte-
nance Cartridge. The Maintenance Cartridge may become damaged.
a
Replacing the Maintenance Cartridge iPF830
User's Guide
Maintenance and Consumables Maintenance Cartridge
588

Canon imagePROGRAF iPF830 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Minimum line width	0.02 mm
Number of power supply units	1
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3az
Media thickness	0.07 - 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	1117.6 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1
JIS B-series sizes (B0...B9)	B0, B2
Display	LCD
Product color	Black, Grey
Storage media	HDD
Internal storage capacity	320 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	52 dB
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet interface type	Gigabit Ethernet
Power supply	190 W
Power consumption (off)	0.5 W
Power consumption (standby)	5 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	975 mm
Width	1893 mm
Height	1144 mm