Important
•
Do not touch the Linear Scale (a), Carriage Shaft (b),
or Ink Tube Stabilizer (c). Touching these parts may
damage them.
4
If the Cutter is out, move the Cutter to the right side, away
from the paper.
Important
•
If the Cutter is on the left side, be sure to move it to the right. If the Cutter is on the left side when you
turn the printer on, the printer may rip the paper.
5
Lift the Release Lever.
Clearing Jammed Roll Paper
iPF830
User's Guide
Troubleshooting Problems Regarding Paper
608
To Next Page
Loading...
