10
Access the Page Setup pane.
11
Select and click a roll paper in the A Paper Source list.
12
Select the paper width of the roll loaded in the printer for B Roll Width. In this case, 10 in. (254.0mm) is
selected.
13
Select the D Enlarged/Reduced Printing check box.
14
Select F Fit Roll Paper Width.
15
Select the H Borderless Printing check box.
16
Confirm the print settings, and then click M Print to start printing.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.258
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)
iPF830
User's Guide
Enhanced Printing Options Borderless Printing
88
To Next Page
Loading...
