•
Layout Area
This allows you to check the arrangement and orientation of objects.
•
Status Bar
This shows the paper source, roll paper width, and output size.
Finished Size Settings Dialog Box
Finished Size Settings Dialog Box
This dialog box is displayed when you select Finished Size Settings from the Edit menu. This allows you to configure
finished size settings.
•
Finished Size
Selects the method for setting the finished size.
The following settings are available for the finished size.
Setting Details
Fit Roll Paper Width Prints by automatically enlarging or reducing the entire document so that the width of the docu-
ment matches the roll paper width.
Specify Folded Size Prints by automatically enlarging or reducing the entire document to match the size of the paper.
Select the actual size of the paper you want to print on in Fit Paper Size.
Rotate Page 90 degrees (Conserve
Paper)
Prints by rotating pages by 90 degrees. Pages are automatically rotated if they will fit within the
roll paper width when rotated, and are not rotated if they will not fit within the roll paper width.
iPF9400
Finished Size Settings Dialog Box (Windows)
User's Guide
Windows Software Free Layout
237
To Next Page
Loading...
Need help?
General
Weight and Dimensions
