11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
In C Borderless Printing Method, click F Print Image with Actual Size.
14
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings." →P.176
Borderless Printing at Actual Size (Mac OS X)
Borderless Printing at Actual Size (Mac OS X)
This topic describes how to print borderlessly at actual size based on the following example.
Important
• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed Settings dialog box. In
this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the
upper and lower bands with scissors.
•
Document: Any type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
•
Paper: Roll
•
Paper type: Canon Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
1
Choose Page Setup from the application menu to dis-
play the Page Attributes dialog box.
2
Select the printer in the B Format for list.
3
In the C Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Border-
less.
Note
• Paper sizes supported for borderless printing are indicated by -Borderless.
4
Click F OK to close the dialog box.
5
In the application, create an original that takes up the entire space of the paper size.
Borderless Printing at Actual Size (Mac OS X)
iPF9400
User's Guide
Enhanced Printing Options Printing at full size
92
To Next Page
Loading...
Need help?
General
Weight and Dimensions
