Canon imagePROGRAF iPF9400 - Roll Paper Cannot be Inserted into the Paper Feed Slot

6
If the paper is not visible, lift the Ejection Guide, remove
the Roll Holder, and clear the paper jam from below.
After removing the paper, make sure there are no other
scraps of paper in the printer, and then lower the Ejec-
tion Guide.
7
If the Carriage is on the left, move the Carriage to the
right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn
on the printer.
8
Lower the Release Lever and close the Top Cover.
9 Turn the printer on. (See "Turning the Printer On and Off.") →P.21
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.") →P.878
(See "Clearing a Jammed Sheet.") →P.881
iPF9400 Roll paper cannot be inserted into the paper feed slot
User's Guide
Troubleshooting Problems Regarding Paper
883