Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up ...................................................................................... 886
The printer does not respond even if print jobs are sent ................................................................................... 886
Ink Filling.. is displayed ...................................................................................................................................... 886
The display screen indicates Agitating... ........................................................................................................... 886
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause Corrective Action
The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
The target printer was not
selected when printing.
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try printing
again.
The print job is paused. In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers) window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac OS
X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
Cause Corrective Action
In the Control Panel menu, Pause Print is On. Set Pause Print to Off.
(See "Pausing Printing.") →P.33
You have selected Save in mail box in Output Method on the
printer.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.") →P.763
Print jobs are pending. Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).") →P.761
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause Corrective Action
The printer was forced off during operation. Wait until the system has been filled with ink. This process may take about nine minutes.
The display screen indicates Agitating...
The display screen indicates Agitating...
Cause Corrective Action
Ink agitation is in pro-
gress.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer was off. (Between about a minute and a half to
twenty minutes.)
The Data lamp on the Control Panel does not light up
iPF9400
User's Guide
Troubleshooting Printing does not start
886
To Next Page
Loading...
Need help?
General
Weight and Dimensions
