Note
• If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length after
the type of paper. (See "Specifying the Paper Length.") →P.539
5
Complete settings in the printer driver for the type of paper and other details.
•
Specifying Paper in the Printer Driver (Windows) →P.174
•
Specifying Paper in the Printer Driver (Mac OS X) →P.360
6
Send the print job.
•
Printing in Windows →P.26
•
Printing from Mac OS X →P.27
The printer now starts printing the print job.
Loading and Printing on Sheets
Loading and Printing on Sheets
These are the basic steps for loading sheets and then printing.
Follow the steps below to load and print on sheets.
Note
• For details on supported types and sizes of paper, see Paper Sizes or the Paper Reference Guide. (See "Paper Sizes.")
→P.522 (See "Types of Paper.") →P.522
• Borderless printing is not supported on sheets. For the features and the main printing methods available for sheet printing, see
"Printing Options Using Rolls and Sheets." →P.20
1
Turn the printer on. (See "Turning the Printer On and
Off.")
→P.21
2
Complete settings in the printer driver for the type of paper and other details.
•
Specifying Paper in the Printer Driver (Windows) →P.174
•
Specifying Paper in the Printer Driver (Mac OS X) →P.360
iPF9400
Loading and Printing on Sheets
User's Guide
Basic Printing Workflow Printing procedure
25
To Next Page
Loading...
