Canon imagePROGRAF iPF9400 User Manual

Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. ............................................................................................. 922
Cannot adjust printhead. .................................................................................................................................... 925
Cannot calibrate. ................................................................................................................................................ 922
Excessive temperature or humidity. ................................................................................................................... 922
Please execute common calibration. ................................................................................................................. 923
Please commn calibrt using above paper. ........................................................................................................ 923
Please calibrate using above paper. ................................................................................................................. 923
Borderless printng not possible. Paper stretched or shrank. ............................................................................ 923
Before borderless printing, move the blue platen switch. ................................................................................. 923
Borderless printng not possible. ........................................................................................................................ 918
Blue platen switch is dirty. ................................................................................................................................. 924
Move the blue platen switch No.xx to the right. (xx represents a number) ....................................................... 924
Cannot adjust paper feed. ................................................................................................................................. 924
Check printed document. .................................................................................................................................. 924
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible with
color calibration is not
loaded.
1.
Press the OK button to clear the error.
2. Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide.)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
Cannot calibrate.
Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Otherwise,
you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide.)
The test pattern was printed too faintly. Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.") →P.888
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Excessive temperature or humidity.
Excessive temperature or humidity.
Cause Corrective Action
The temperature or humidity where the
printer is installed is out of the acceptable
range for operation.
Press ▲ or ▼ to select Stop, and then press the OK button to stop printing.
Use the printer under suitable environmental conditions. Also note that various environmental
conditions are recommended for various types of paper. For details on the recommended envi-
ronmental conditions, see the Paper Reference Guide.
(See Paper Reference Guide.)
Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibra-
tion. However, note that correct adjustment may not be possible.
Cannot execute this command. Use other paper.
iPF9400
User's Guide
Error Message Messages regarding printing or adjustment
922

Canon imagePROGRAF iPF9400 Specifications

General

Color	Yes
Printing colors	Black, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Page description languages	GARO
Bundled software	Canon Printer Driver, Print Plug-in for Adobe Photoshop. Print Plug-in for Digital Photo Professional, Printer Driver Extra Kit (Free Layout, Color imageRUNNER Enlargement Copy, Advanced Preview), Print Plug-in for Microsoft® Word/Excel/PowerPoint (PC only), Accounting Manager, Gallery Wrap Feature
Media thickness	0.07 – 0.8 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (rolls)	254 - 1524 mm
Media width (sheets)	203.2 - 1524 mm
Maximum roll diameter	150 mm
Storage media	HDD
Internal storage capacity	250 GB
Sound power level (standby)	35 dB
Sound pressure level (printing)	68 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Gigabit Ethernet
Power consumption (off)	5 W
Power consumption (standby)	6 W
Power consumption (typical)	190 W
Operating temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	766 mm
Width	2299 mm
Height	1144 mm