Handling rolls
Handling rolls
Attaching the Roll Holder to Rolls ...................................................................................................................... 530
Loading Rolls in the Printer ................................................................................................................................ 533
Changing the Type of Paper .............................................................................................................................. 537
Specifying the Paper Length .............................................................................................................................. 539
Removing the Roll from the Printer ..................................................................................................................... 539
Removing the Roll Holder from Rolls ................................................................................................................. 542
Clearing Jammed Roll Paper ............................................................................................................................. 878
Feeding Roll Paper Manually ............................................................................................................................. 543
Keeping Track of the Amount of Roll Paper Left ................................................................................................ 544
Specifying the Ink Drying Time for Rolls ............................................................................................................ 544
Specifying the Cutting Method for Rolls ............................................................................................................. 546
Cutting the Leading Edge of Roll Paper Automatically ...................................................................................... 552
Reducing Dust from Cutting Rolls ...................................................................................................................... 554
Roll Holder Set ................................................................................................................................................... 697
Attaching the Roll Holder to Rolls
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped
with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Roll Holder Side Holder Stopper Side Roll Holder Side Holder Stopper Side
No Attachment Needed 2-Inch Paper Core Attachment 3-Inch Paper Core Attachment #1 3-Inch Paper Core Attachment #2
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause injury.
Attaching the Roll Holder to Rolls
iPF9400
User's Guide
Handling and Use of Paper Handling rolls
530
To Next Page
Loading...
Need help?
General
Weight and Dimensions
