Canon imagePROGRAF iPF9400 - Page 401

Note
• You can select only after Driver Matching Mode has been selected in Matching Mode.
• Gamma
You can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer im-
pression than 2.2, select 1.8.
• Input Profile
Select the input profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
•
Printer Profile
Select the printer profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
• Soft Proof
When you place a checkmark here, ColorSync applies to the preview area.
Note
• You can select only after ColorSync has been selected in Matching Mode.
iPF9400 Matching (Mac OS X)
User's Guide
Mac OS X Software Preview
401