1
Display the Page Setup sheet.
2
Select Roll Paper in Paper Source.
3
Click the Roll Paper Options button.
4
Set the roll paper options and click the OK button.
Note
• For more information about the Roll Paper Options dialog box, see "Roll Paper Options Dialog Box." →P.483
• Click the Defaults button to return all of the roll paper option settings to their defaults.
5
Select either Portrait or Landscape as the media orientation for the image in Orientation.
Note
• When you select Portrait, the image on the media prints as it appears on the screen.
• When you select Landscape, the image on the media prints rotated 90 degrees.
6
Click the Enlarged/Reduced Printing check box on.
Note
• This is not displayed when a checkmark is placed in Borderless Printing.
7
Select Fit Roll Paper Width.
8
Click the Print button.
The image prints covering the entire width of the roll paper.
Enlarge/Reduce and Print Matching Width of Roll Paper
iPF9400
User's Guide
Mac OS X Software Print Plug-In for Photoshop / Digital Photo Professional
502
To Next Page
Loading...
Need help?
General
Weight and Dimensions
