8
Holding the printed document to prevent it from drop-
ping, press the Cut button to cut the roll.
Manual (when using media that cannot be cut with the Cutter Unit)
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Paper tab (
).
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button. The Paper Menu is displayed.
3
Press ▲ or ▼ to select Paper Details, and then press the OK button.
4
Press ▲ or ▼ to select the type of paper, and then press the OK button.
5
Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6
Press ▲ or ▼ to select Manual, and then press the OK button.
7
When Perform the detection of paper leading edge? is displayed, select Perform(recommend).
8
Print the job.
The printer stops advancing the paper after printing.
Specifying the Cutting Method for Rolls
iPF9400
User's Guide
Handling and Use of Paper Handling rolls
548
To Next Page
Loading...
