First Level Second Level Third Level Fourth Level Fifth Level
Print Job Log
Pause Print Off *┋ On
HDD Information Total capacity ┋ Box free space
*1: If a pending job is selected, Print Anyway is displayed.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
First Level Second Level Third Level Fourth Level Fifth Level Sixth Level Seventh Level
Test Print Nozzle Check ┋ Status Print ┋ Interface Print ┋ Paper Details ┋ Print Job Log ┋ Menu Map
Adjust Printer Head Posi. Adj. Standard
Simple
Other Initial adjustmt ┋ Manual (*1)
Feed Priority Adj. Priority Automatic *┋ Print Quality ┋ Print Length
Adj. Quality (*2) Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual
Adjust Length
(*3)
Adjustment-
Print
A:High ┋ B:Standard/Draft
Change Set-
tings
A:High ┋ B:Standard/Draft
Calibration Auto Adjust
Calibration Log Date ┋ Paper Type ┋ Adjustment Type
Use Adj. Value Disabled ┋ Enabled *
Set Exec.
Guide
Off *┋ On
Return Defaults
Maintenance Head Cleaning Head Cleaning A ┋ Head Cleaning B
Nozzle Check
Replace
P.head
Printhead L ┋ Printhead R ┋ L & R Printheads
Repl. maint cart
Head Info Printhead L ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead R
ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Repl. S. Cleaner
Change Cutter
Interface Setup
(*8)
EOP Timer (*8) 10 sec. ┋ 30 sec. ┋ 1 min. ┋ 2 min. ┋ 5 min. ┋ 10 min. *┋ 30 min. ┋ 60 min.
TCP/IP (*8) IPv4 (*8) IPv4 Mode (*8) Automatic ┋ Manual *
Protocol (*4)
(*8)
DHCP (*8) On ┋ Off *
BOOTP (*8) On ┋ Off *
RARP (*8) On ┋ Off *
IPv4 Settings IP Address (*9) xxx.xxx.xxx.xxx
Subnet Mask
(*9)
xxx.xxx.xxx.xxx
Default G/W (*9) xxx.xxx.xxx.xxx
DNS Settings
(*9)
DNS Dync up-
date (*9)
On ┋ Off *
Pri. DNS SrvAddr (*9)
Sec. DNS SrvAddr (*9)
iPF9400
Menu Structure
User's Guide
Control Panel Printer Menu
663