Canon MV750i E - Separation of Front Cover Unit

MV750i E, MV730i E, MV700i E, MV700 E, MV690 E
DISASSEMBLING
6
1-4 Separation of Front Cover Unit
(1) Open the Cassette Cover, Jack Cover and F Jack Cover, remove four screws (b × 3, c × 1), disconnect the CN2101, and detach the
Front Cover Unit.
<Note on Reassembling>
(1) Mount the Front Cover Unit so that the F Plate part passes under the GND Plate.
(2) Tighten the screws pressing the Front Cover Unit gently against the main unit.
Fig. 3
3mm
Metal
M1.7
Metal
M1.7
(self tap)
4.5mm
b
c
Note on Reassembling (1)
F Plate
Part
Cassette Cover
Jack Cover
F Jack Cover
Front Cover Unit
GND Plate
F Plate
Part
CN2101
(1)
(1)
(1)
(1)
(1)
(1) - c
(1) - b
(1) - b