Canon VB-R13 - [Event] > [Intelligent Function] - Shared Operations; Configuring Operations for Detected ([Event] Tab)

Setting Page
5
197
This explains functions common to both video detection and auto tracking.
Configuring Operations for “Detected” ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
(1) Specify Operation Timing (Multiple Selections Possible)
[ON Event Operation]
When selected, the operations set in (2) are performed when the mode becomes “detected”.
[OFF Event Operation]
When selected, the operations set in (2) are performed when “detected” mode ends.
[Detected mode Operation]
When selected, the operations set in (2) are performed while “detected” mode is active.
[Action During Auto Tracking]
When selected, the operations set in (2) are performed while the moving object is automatically tracked.
(2) Specify Event Operation (Multiple Selections Possible)
[E-mail Notification]
When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the
Setting Page must be set in advance (P. 160).
[Video Record]
When selected, video recording begins according to the timing specified in (1). [Video Record] > [Upload] (P. 156) or
[Memory Card] > [Video Record Setting] (P. 215) in the Setting Page must be set in advance.
(3) Specify Audio Playback Timing
[Audio Playback at ON Event]
When selected, the sound clip specified in (4) is played back when the mode becomes “detected”.
[Audio Playback at OFF Event]
When selected, the sound clip specified in (4) is played back when “detected” mode ends.
(4) Sound Clip Settings
[Event] > [Intelligent Function]
- Shared Operations -
(1)
(3)
(4)
(5)
(2)
(1)
(3)
(4)
(5)
(2)
Video Detection Auto Tracking
R13 R12
R13
R12
R13 M50
H652
H651
R13
M50 H652
H651