Setting Page
207
Certificate Management
Manage the SSL/TLS certificate.
[Generate Certificate Signing Request]
Click [Exec] to create a server private key and generate a certificate signing request.
Once processed, the certificate signing request will be displayed in a separate window.
Generating a certificate signing request takes time, so it is recommended that you stop video transmission and upload processes.
[Display Certificate Signing Request]
Click [Exec] to view the details of the certificate signing request.
[Install Server Certificate]
Perform this operation to install a server certificate.
Specify the certificate file to be installed using [Browse] and click [Exec].
The certificate installed will take effect after rebooting.
[Install Intermediate Certificate]
Perform this operation to install an intermediate certificate.
Specify the certificate file to be installed using [Browse] and click [Exec].
The certificate installed will take effect after rebooting.
To install an intermediate certificate and a cross root certificate, use a text editor or similar software to place them in the same file and
install them as an intermediate certificate.
[Delete Server Certificate]
Click [Exec] to delete the server certificate.
However, if SSL/TLS communications are enabled, the certificate cannot be deleted. Set [HTTPS Connection Policy] to
[HTTP] before deleting a certificate.
The deletion will take effect after rebooting.
[Delete Intermediate Certificate]
Click [Exec] to delete the intermediate certificate along with the cross root certificate.
However, if SSL/TLS communications are enabled, the certificate cannot be deleted. Set [HTTPS Connection Policy] to
[HTTP] before deleting a certificate.
The deletion will take effect after rebooting.
[Display Server Certificate Details]
Click [Exec] to view the details of the server certificate.
[Display Self CA Certificate]
Used for the purpose of testing SSL/TLS communications, but otherwise not normally used.
[Backup]
Click [Exec] to perform a backup of the certificates and private key. This can only be performed when [HTTPS] or [HTTP
and HTTPS] is set for [HTTPS Connection Policy] to perform SSL/TLS communication.
[Restore]
Installs the certificates and private key from backup.
Click [Browse] to specify the backup file, then click [Exec]. This can only be performed when [HTTPS] or [HTTP and HTTPS]
is set for [HTTPS Connection Policy] to perform SSL/TLS communication.
The restored certificate will take effect after rebooting.
Encrypted Communications
Set encrypted communications.
[HTTPS Connection Policy]
Set SSL/TLS communication with HTTPS connections.
Select [HTTP] if you do not want to perform SSL/TLS communication.
Select [HTTPS] or [HTTP and HTTPS] if you want to perform SSL/TLS communication. Connections using SSL/TLS are
enabled after restarting.
To Next Page
Loading...
