Canon VB-R13 - Page 203

Setting Page
5
203
Event 2 Triggered but Event Gap Setting ([4] sec.) Exceeded
[Status] of Event 1 Set to [OFF], ON States Do Not Coincide
One Event Switches Between ON/OFF
ON
Event 1
Event 2
Consolidated
State
OFF
ON
OFF
ON
OFF
The gap between the occurrence of event 2 after the
occurrence of event 1 exceeds the value specified for the
[Event Gap] setting. Therefore, a linked event does not occur.
Event Gap (4 Sec. in This Example)
ON
Event 1
Event 2
Consolidated
State
OFF
ON
OFF
ON
OFF
The linked event does not occur when event 1
turns OFF, but at the moment event 2 turns ON.
Event Gap (4 Sec. in This Example)
ON
Event 1
Event 2
Consolidated
State
OFF
ON
OFF
ON
OFF
Event Gap (4 Sec. in This Example)