Canon VB-R13 - Page 231

Appendix
6
231
S311 Working error in external input/output
service [err]
S312 Working error in timer service [err]
S320 PAN/TILT operation error [err]
S330 Failure of fan [err]
S331 Failure of heater [err]
S410 Event service initialization error [crit]
S411 External input/output service
initialization error [crit]
S412 Timer service initialization error [crit]
Description cannot work extio [%1][%2][%3]
(S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external
input/output device service was
running.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description cannot work timer [%1][%2][%3]
(S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description %1 error occurred. [%2] (S320)
%1 PAN | TILT
%2 Warning details
Meaning An error occurred during operation or
stopping of PAN/TILT.
Countermeasure Check that the camera is not touching
the dome, etc.
If the error is not caused by problems
such as contact with peripheral items,
the camera is faulty. Arrange for
servicing.
Description fan [%1] is stopped (S330)
%1 Fan number
Meaning Detected that the fan is not rotating or
the rotation speed has significantly
decreased.
Countermeasure If the problem persists after rebooting,
the fan may have failed. Arrange for
servicing.
Description HEATER [%1] failure (S331)
%1 Heater number
Meaning An abnormality was detected when
using the heater.
Countermeasure There may be a connection problem
with the heater unit you attached, so
check the connections. If the problem
persists after rebooting, the heater may
have failed. Arrange for servicing.
Description event initialization error [%1][%2]
(S410)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the event service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description extio initialization error [%1][%2]
(S411)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the external input/output device
service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.
Description timer initialization error [%1][%2]
(S412)
%1 Error number
%2 Cause of error
Meaning An error occurred in the initialization of
the timer service.
Countermeasure If the problem persists after rebooting,
the camera is faulty. Arrange for
servicing.