Canon VB-R13 - Page 238

238
 Memory card warning
M201 Memory card is write-protected
[warning]
M203 Not enough space on memory card
[warning]
M204 Invalid file removed [warning]
M205 Checking management information file
[warning]
M206 Invalid management information
removed [warning]
M207 Memory card removed without
unmounting [warning]
 ONVIF warning (RTP)
R101 RTP session timeout [notice]
R102 Information acquisition failure (RTP
payload size) [notice]
R102 Information acquisition failure (IP
address) [notice]
R103 RTSP authentication failure [notice]
R107 RTSP connection failure [notice]
Description Readonly filesystem (M201)
Meaning A write-protected memory card is
inserted.
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
Description Invalid file (%1) was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
Description %1 checking management file (M205)
%1 Start | Finish
Meaning The memory card may have been
removed without being unmounted.
Start/finish checking management
information file.
Description Invalid db information(%1)(%2) was
removed(M206)
%1 Name of management information file
containing invalid information
%2 ID of invalid information
Meaning Invalid management information was
removed.
Description Memory card was pulled before
unmount. (M207)
Meaning Memory card was removed when
mounted.
Description session timeout: session ID=%1
(R101)
%1 Session ID
Meaning RTP session has timed out.
Description cannot get parameter:
RTP_payload_size (R102)
Meaning Information acquisition has failed (RTP
payload size).
Description cannot get parameter: IP_address
(R102)
Meaning Information acquisition has failed (IP
address).
Description RTSP authorization error (R103)
Meaning RTSP authentication has failed.
Description RTSP Error: error_code=%d: Service
Unavailable (R107)
%d 400: Value used for RTSP is invalid.
401: RTSP authentication failure or
missing valid authentication
information.
457: Playback time for RTSP is invalid.
501: An invalid RTSP option was used.
503: Failure to offer service, due to
insufficient resources.
The number of maximum RTP
sessions, has passed the limit.
Meaning RTSP connection has failed.