240
W031 Transmitted video data size [info]
W040 Clearing to external memory [info]
Audio server notification
B001 Starting and stopping of audio server
[info]
B011 Audio client connected [info]
B012 Audio client closed [info]
Camera application notification
C001 Starting and stopping of camera control
module [info]
C002 Camera application started and
stopped [info]
Video notification
V001 Starting and stopping of video server
[info]
V020 Starting intelligent service [info]
V021 Shutting down intelligence service [info]
Uploader notification
A004 Starting and stopping of uploader [info]
A040 Number of uploads (MAIL) [info]
Description %1= host=<Host>, user=<User>,
video=<jpg|h264>:<Number of
frames> (W031)
1% W: WebView session, V: Session-less
video client
Meaning When a client disconnected, the total
data that was sent to the client
displayed in number of frames.
Description %1 the image storing - %2 (W040)
%1 Starting or stopping
%2 Reason for starting/stopping
Meaning Started or stopped clearing stream
recording to external memory.
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut
down.
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
Description [%1] %2 closed n=%3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
Description %1 camerad (C001)
%1 starting | stopping
Meaning The camera control module started/
stopped.
Description starting cameraappl (C002)
Meaning The camera application started.
Description %1 video (V001)
%1 Starting or stopping
Meaning The video server was started/stopped.
Description starting intelligent. (V020)
Meaning Intelligent service was started.
Description shutdown intelligent. (V021)
Meaning Intelligent service was shut down.
Description %1 uploader (A004)
%1 Starting or stopping
Meaning The uploader was started or stopped.
Description uploader mail: normal=%1 test=%2
(A040)
%1 Number of normal uploads.
%2 Number of test uploads.
Meaning Shows the number of uploads
executed.
To Next Page
Loading...
