Canon VB-R13 - Page 256

256
03: / 128 Yes
04: / 128 Yes
05: / 128 Yes
06: / 128 Yes
07: / 128 Yes
08: / 128 Yes
09: / 128 Yes
10: / 128 Yes
11: / 128 Yes
12: / 128 Yes
13: / 128 Yes
14: / 128 Yes
15: / 128 Yes
16: / 128 Yes
17: / 128 Yes
18: / 128 Yes
19: / 128 Yes
20: / 128 Yes
• Certificates
Certificate Status Not Installed
Country (C)
State/Province (ST)
Locality (L)
Organization (O)
Organizational Unit (OU)
Common Name (CN)
Validity Period Start Date
Validity Period End Date
• Encrypted Communications
HTTPS Connection Policy HTTP
• 802.1X Authentication
802.1X Authentication Disable
Authentication Status Stop
• Authentication Method
Authentication Method EAP-MD5
User Name
•IPsec
IPsec Auto Key Exchange
• Auto Key Exchange Settings
IPsec SA Encryption Algorithm AES->3DES
IPsec SA Authentication Algorithm HMAC_SHA1_96
IPsec SA Validity Period (min) 480
Item Setting
ISAKMP SA Encryption Algorithm AES->3DES
ISAKMP SA Authentication
Algorithm
SHA1
DH Group Group 14->Group 5->
Group 2
ISAKMP SA Validity Period (min) 480
• IPsec Set 1
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix Length 16
IKE Pre-Shared Key
SA ESP Encryption Algorithm AES
SA ESP Authentication Algorithm HMAC_SHA1_96
SA ESP Encryption Key (outbound)
SA ESP Authentication Key
(outbound)
SA ESP SPI (outbound)
SA ESP Encryption Key (inbound)
SA ESP Authentication Key
(inbound)
SA ESP SPI (inbound)
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key
(outbound)
SA AH SPI (outbound)
SA AH Authentication Key
(inbound)
SA AH SPI (inbound)
• IPsec Set 2
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Item Setting