62-11640 7–28
00041 ENGINE STALLED - CONTINUED
5. Check Engine Speed Sensor (ENSSN)
Inspect harness, connector pins & terminals. (See wiring schematic Section 10.) Verify no physical
damage to harness, and no damage, moisture, or corrosion in connectors.
6. Check Engine Air-Intake System
a. Check air cleaner indicator. Flag must not be visible.
b. Inspect air intake system. Verify hoses & tubes in good condition, with no kinks or restrictions.
7. Check Engine Exhaust System
Inspect the exhaust system. Must be clear and unobstructed.
8. Check Engine
a. Check Injection pump timing. Timing must be correct.
b. Check engine valve adjustment. Rocker arm clearance must be correct.
c. Check engine compression. Compression must be above 400 psig (27.2 bar).
9. Check Refrigeration System
Check discharge & suction pressures. Must be within normal operating range for conditions.
To Next Page
Loading...
Need help?
General
