CASE CONSTRUCTION CX17C - Machine Control Pattern Selection

2-SAFETYINFORMATION
(17)Machinecontrolpattern
WARNING
Unexpectedmachinemovement!
Pilotcontrolshavetwodifferentmachinecon-
trolpatterns.Beforeyouoperatethemachine,
checkwhichpatternisactive.
Failuretocomplycouldresultindeathorse-
riousinjury.
W1577A
Themachinecontrolpatterncaneasilybechangedtothe
"ISOtype"ortothe"SAEtype"bychangingtheposition
ofthelever-pattern.
Howtouse:
1.Movethelevertothe“ISO”or“SAE”position.
Location:thissignislocatedontheleft-handsideofthe
upperstructure.
Quantity:1
Partnumber:99MJ-07360
SMIL19MEX0843BA21
2-27