SECTION 00 -- GENERAL INFORMATION -- CHAPTER 3
00-2
LUBRICATION
Adequate lubrication and maintenance on a regular schedule is vital to maintaining your equipment. To ensure
long service and efficient operation, follow the lubrication and maintenance schedules outlined in this manual.
The use of proper fuels, oils, grease and filters, as well as keeping the systems clean, will also extend machine
and component life.
IMPORTANT: Always use genuine Case IH replacement parts, oils and filters to ensure proper operation, filtra-
tion of engine and hydraulic systems. See your Case IH dealer for additional quantities.
RECOMMENDED LUBRICANTS
Lubricant Location Used Type Case IH No. Amount
Oil Engine and Pivot Points with-
out Grease Fittings, Chains
10W--30 104104A1 1--quart
104106A1 5--gallons
139033A1 1--gallon
15W--40 407410R2 1--quart
407414R2 5--gallons
Coolant Engine Ethylene. Coolant Concentrate
Hydraulic Oil Hydraulic System
Hydrostatic System
Transmission
Front Axle
Rear Axle
Power Steering
HY -- Tran Ultra 139029A2 1--gallon
143945A2 2.5--gallons
372705R7 5--gallons
Gear Oil Gearboxes 80W90 SAE API GL5 135H EP Gear Lube
Grease All Grease Fittings High Viscosity Lithium Base--NLGI#2 132096A1 Cartridge
To Next Page
Loading...
