SECTION 58 -- ATTACHMENTS AND HEADERS -- CHAPTER 2
58-8
ROCK GUARDS
Rock guards, 1, can be removed by removing bolts,
2.
Broken rock guards should be replaced immediately.
Rock guards which are worn thin should be replaced
before they break.
16
SKID SHOES
Skid shoes can be removed by removing bolts, 1.
Broken skid shoes should be replaced immediately.
Skid shoes which are worn thin should be replaced
before they break.
17
CUTTER BAR INSPECTION/FAILURE
ANALYSIS
In the event of a failure of the modular disc cutter bar,
it is important to properly inspect the unit to deter-
mine the extent of the damage. A thorough examina-
tion will help to locate all the damaged components,
and minimize unnecessary repair labour. Often, it
may not be necessary to disassemble the cutter bar
to repair or replace the failed components.
To Next Page
Loading...