173
Swap the screens so the graph is on the inactive (right) screen.
K2(SWAP)
Select the function for the graph that you want in the now-empty active (left)
screen.
A1(SEL)
Draw the graph.
6(DRAW)
•At this point, you could perform a copy operation and superimpose the active
graph over the inactive graph.
K1(COPY)
•Pressing !6 (G ↔ T) lets you switch between display of the active and
inactive graphs, using the entire display for each.
!6(G ↔ T)
!6(G ↔ T)
!6(G ↔ T)
Displaying a Graph in the Inactive Screen 11 - 4
To Next Page
Loading...
