21
External Balance
SELECTED BALANCE: SCIENTECH(2400,F,1,E)
NONE METTLER
SCIENTECH DENVER
SARTORIUS CUSTOM
Press SELECT to Change
External Balance
10. Using the arrow keys, highlight the selected external balance or “None”
if no external balance is to be used. Press the SELECT key.
Note: The numbers in parentheses after each balance refer to the baud rate, data bits,
stop bits and parity settings for the balances.
Note: For balances not shown, choose “Custom.” Press the SELECT key to choose
the appropriate baud rate, data bits, stop bits and parity settings.
11. Press the BACK key to return to the Setup Menu.
System Options
12. Using the arrow keys, highlight System Options. Press the SELECT key.
Setup Menu
AUTO START/STOP PROGRAM OPTIONS
CALIBRATION PRINTER SETUP
EXTERNAL BALANCE COMPANY NAME
SYSTEM OPTIONS DELETE METHOD
Timers
13. Using the arrow keys, highlight Timers. Press the SELECT key.
System Options
TIMERS LANGUAGE
TESTS PASSWORD
INFORMATION
CONTROLS
Timers
SET CLOCK
SCREEN SAVER TIME: XX:XX
To Next Page
Loading...
Need help?
General
