CEM Phoenix User Manual

26
Setup Menu
AUTO START/STOP PROGRAM OPTIONS
CALIBRATION PRINTER SETUP
EXTERNAL BALANCE COMPANY NAME
SYSTEM OPTIONS DELETE METHOD
Printer Setup
SELECTED PRINTER: XXXXX XXXXX
IBM HP LASERJET
EPSON COLOR CITIZEN
CANON COLOR PANASONIC
Press SELECT to Change
Note: The instrument default is the Epson color printer.
44. Using the arrow keys, highlight the type of printer to be used with the Phoenix
instrument. Press the SELECT key.
45. Press the BACK key to return to the Setup Menu screen.
Printer Setup
43. Using the arrow keys, highlight Printer Setup. Press the SELECT key.
Setup Menu
AUTO START/STOP PROGRAM OPTIONS
CALIBRATION PRINTER SETUP
EXTERNAL BALANCE COMPANY NAME
SYSTEM OPTIONS DELETE METHOD
Note: The key beeper is an audible “beep” after each key stroke and can be turned on
and off.
40. Using the arrow keys, highlight Temperature. Press the SELECT key to toggle
and select degrees C or degrees F.
Note: The serial output permits the temperature and weight to be recorded and dis-
played by the computer.
41. Using the arrow keys, highlight Serial Output. Press the SELECT key to
toggle between “2” and “4.”
42. Press the BACK key to return to the Setup Menu screen.

CEM Phoenix Specifications

General

Brand	CEM
Model	Phoenix
Category	Furnace
Language	English