CEM Phoenix User Manual

Operation ManualOperation Manual
Operation Manual
Innovators in
Microwave Technology
600134
Rev. 12

CEM Phoenix Specifications

General

Brand	CEM
Model	Phoenix
Category	Furnace
Language	English

Summary

Installation Guide

Installation Site Selection

Criteria for selecting an installation location for the Phoenix instrument.

Door Protection Mechanisms

Furnace Door Holder Installation

Instrument Startup Procedure

External Balance Installation and Setup

External Balance Setup (Port J1)

Serial port configurations for connecting external balances.

Printer and Computer Connectivity

Personal Computer Setup (Port J2)

RS-232C serial connection details for interfacing with a PC.

Setup Menu Navigation

External Balance Setup

Selecting or configuring an external balance for instrument use.

Quick Test Procedure (No External Balance)

Quick Test Procedure (External Balance)

Editing and Creating Methods

Create New Method

Ramping Method Setup

Performing Methods

Standard or Drying Method Execution

Performing standard or drying methods with or without an external balance.

Ramping Method Operation

Ramping Method with External Balance

Ramping Method with Syringe Weighing

Maintenance, Troubleshooting, and Service

Routine Maintenance Schedule

Microwave Leakage Measurement Procedure

Microwave Power Measurement

Calibration Procedures

Furnace Temperature Calibration

Calibrating the furnace thermocouple using software and a calibration instrument.

Enter Previous Calibration Values

Troubleshooting Guide

Understanding Error Messages

Component Removal and Replacement

Fuse Replacement Procedure

Furnace Thermocouple Replacement

Warranty Information and Service

Warranty Coverage and Responsibilities

Obtaining Service and Support

Specific Installation Procedures

Vapor Scrubber Installation