To Next Page

To Previous Page

Ramping

Note: If Ramping is selected, the Select Option screen will appear. Proceed to step

10.

10. Press NEXT.

STAGE TEMP RAMP HOLD DWELL

1 0 C 00:00 No 00:00

2 0 C 00:00 No 00:00

3 0 C 00:00 No 00:00

4 0 C 00:00 No 00:00

Press for more stages

or press HOME

∆

Note: The Hold feature will hold (maintain) the programmed temperature and delay

the dwell time until the instrument operator presses the START key. If “Hold” is

turned on for a speciﬁ c stage, a “Hold” message will ﬂ ash on and off on the screen.

13. Using the arrow keys, the numeric keyboard and the SELECT key, enter the

desired method parameters including temperature, ramp time, dwell time and

whether or not a hold time is required for the applicable number of stages (8

stages maximum)

14. Press the HOME key to return to the CEM Method Menu screen.

AUTOEXTEND RAMP XX

11. Press the SELECT key to toggle between “On” and “Off.”

12. Press NEXT.

Questions and Answers:

Need help?

Do you have a question about the CEM Phoenix and is the answer not in the manual?

CEM Phoenix Specifications

General