To Next Page

To Previous Page

TARING BALANCE

7. Wait for the instrument to tare the balance.

Start Weight

SAMPLE ID: XXXX

Place empty crucible on

balance pan and press NEXT

Press BACK to Retare

8. Place the empty crucible on the balance pan. Press the NEXT key.

Note: Press the BACK key to retare the balance.

READING BALANCE

9. Wait for the instrument to measure the weight of the crucible.

READING BALANCE

Note: Press the BACK key to reweigh the sample.

10. Place the sample in the crucible. Press the NEXT key.

Start Weight

SAMPLE ID: XXXX

CRUCIBLE WT: XXXX.X

Add sample to crucible

and press NEXT

Press BACK key to Reweigh

Questions and Answers:

Need help?

Do you have a question about the CEM Phoenix and is the answer not in the manual?

CEM Phoenix Specifications

General